There are many types of shredders, and strict requirements must be followed when operating them to avoid malfunctions. When vibration occurs, it is important to know the solution and handle it promptly to avoid affecting its effectiveness. Simultaneously maintaining the equipment is crucial as it can prolong its lifespan.
How to solve the vibration of the shredder?
- If it is caused by the rotor of the shredder not being concentric, we can move the position of the motor to the left or right, or add a pad under the motor foot to adjust the concentricity of the two rotors.
- When the vibration frequency of the shredder is high, it may also be due to the lack of concentricity between the coupling and the rotor, or uneven quality of the flat hammer pieces inside the rotor. At this time, corresponding methods should be adopted according to different types of couplings.
- The vibration of the shredder may also be due to the equipment itself not reaching balance. This may be because the fixation of the plastic shredder is not firm enough. This problem can be easily solved by ensuring the firmness of the plastic shredder and tightening the anchor bolts.
What are the correct operating procedures for a shredder?
- After the shredder is powered on, confirm that the equipment is operating normally before adding the crushed material.
- The feeding process should be gradual and not too much material should be added at once, otherwise it may cause the tool to get stuck. Once this phenomenon occurs, immediately stop the machine and cut off the power before processing.
- After cleaning the remaining materials in the crushing bin, close the bin and tighten the screws.
- Sort and pack the broken materials, and clean up the garbage generated by the shredder during operation.
Comments are closed